Nickel 200

Nickel 200 (UNS N02200)

Nickel 200 Alloy, also known as Alloy 200, is a technically pure nickel that exhibits good mechanical properties and excellent corrosion resistance to alkali hydroxides as well as organic compositions, even when exposed to high temperature. Alloy 200 retain its strength and is ductile at low temperature. Alloy 200 is a multipurpose grade and is used in application where alloys are not essential. It also has good magnetic and magnetostrictive properties, high thermal and electrical conductivity as well as low gas content in the electronics industry. Nickel 200 is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1 (ASME VIII Div 1) for service up to 600° F. The corrosion resistance of Nickel 200 makes it particularly useful for maintaining product purity in the handling of foods, synthetic fibers, and caustic alkalies; and also in structural applications where resistance to corrosion is a prime consideration. It’s used in caustic solutions, food handling equipment, and general corrosion-resistant parts and structures. Other applications include chemical shipping drums, electrical and electronic parts, aerospace and missile components and rocket motor cases. Nickel 200 is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1 for service up to 600° F. Nano-Mag Technologies offer various products made from Nickel 200 material including Autoclave, Reactor, Hydrogenator, Pressure vessels, Magnetic Drives, Catalyst Filters, Mini Magnetic Couplings etc. as per the requirement.
Request For ProposalRequest a Test Coupon

Characteristics of Nickel 200

  • Highly resistant to various reducing chemicals & excellent resistance to caustic alkalies.
  • Excellent corrosion resistance to distilled and natural waters
  • Resistance to neutral and alkaline salt solutions
  • Excellent resistance to dry fluorine
  • Widely used to handle caustic soda
  • Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations
  • Good magnetostrictive properties.
  • High electrical and thermal conductivity.
  • Good ductility and low work hardening rate.
  • Good weldability and solderability.

Chemical Composition:

Element%
Nickel:99 min.
Iron:0.40 max.
Manganese:0.35 max.
Silicon:0.35 max.
Copper:0.25 max.
Carbon:0.15 max.
Sulfur1 max.

Indicative Corrosion Data

ChemicalCorrosion Resistance
Alkaline & SaltsGood
Hydrochloric AcidFair
Hydrofluric AcidGood
Nitric AcidNot Suitable
Organic AcidGood
Phosphoric AcidFair
SeawaterFair
Sulfuric AcidFair

Corrosion rates may vary at different concentrations and temperatures . Each user is advised to carry out their own corrosion test with sample coupon

Material Specification

Alloy/FormASMEASTMDIN
Plate, Sheet & StripSB-162B-16217750
Rod & BarSB-160B-16017752
ForgingsSB-564B-56417754
Seamless Pipe & TubeSB-622B-62217551
Welded PipeSB-619B-619-
FittingsSB-366B-366-
Request For ProposalRequest a Test Coupon
EquipmentSpecification/Rating
Nickel 200 High Pressure Autoclave50 ml-100 litres, Upto 350 bar, 500°C
Nickel 200 High Pressure Reactors Nickel 200 Hydrogenators50 ml -50000 litres, Upto 150 bar, 500°C
Nickel 200 Continuous Stirred Tank Reactor50 ml-100 litres, Upto 350 bar, 500°C
Nickel 200 Non-Stirred Pressure Vessels50 ml-100 litres, Upto 350 bar, 500°C
Nickel 200 Catalyst Filters for Precious MetalsAs per requirement
Nickel 200 Magnetic DriveAs per requirement
Nickel 200 Mini Magnetic CouplingNano-20, Nano-40, Nano-80

All Products, Product Specifications and Data are subject to change.

  • Manufacture and handling of sodium hydroxide, particularly at temperature above 300C.
  • Production of viscose rayon. Manufacture of soap.
  • Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane.
  • Manufacture of vinyl chloride monomer.
  • Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.