Non Stirred Pressure Vessels


Nano-Mag Technologies is manufacturer and supplier of High Pressure Non Stirred Reactor systems, Pressure Vessels, Tanks. We offer a broad selection of non-agitated pressure bombs with different volume sizes and pressure range for various applications such as hydrothermal studies, crystal growth, solid state chemical reactions, geological simulations, corrosion studies of chemicals, acids, liquids, metals, acid digestion, storage of liquid or gas, hydrogen disbanding testing, cell disruption by nitrogen decompression etc. and other reactions and investigations which require the higher pressures and temperatures capabilities etc.

Non-stirred vessels are also used for Acid digestion applications. Various materials can be dissolved in Nano-Mag Acid Digestion Vessels using strong mineral acids. We offer removable PTFE liners on request for conducting acidic reactions. Compared to traditional methods of sample preparation, these vessels offer a rapid procedure for sample dissolution or digestion. Samples can be dissolved or digested rapidly using high reaction temperatures well above normal boiling points.
In addition to the standard uses these vessels are also used to perform hydrothermal synthesis. Hydrothermal synthesis involves the growth of materials from aqueous solutions at elevated temperature and pressures. Synthesis of a different inorganic compounds, zeolites and nanomaterials is done by hydrothermal technique. Also these vessels can be used in heating cooling baths for various applications. We offer Manual or Fully Automated Ex-proof / CE / PED / ASME certified systems on request. Customize reactors with specific pressure limits, operating temperatures and volumes for special application can also be manufactured on request. We also offer Computer controlled Scada software to continuously monitor, control & record various parameters. Along with standard size reactors, we also design customized pressure vessels for pressure up to 5,000 psi and temperatures up to 1200°F. We'll help you configure a system that meets all of your research needs.
Request For Proposal

Advantages & Benefits

  • Ease of use: Elegantly designed and easy to operate vessels, can be used in heating cooling bats for various applications
  • Automatic Control: Computer controlled scada system with data logging and automatic control is available as option
  • Touch Control: Optional integrated operator interface touch panel
  • Constant Temperature: Efficient heat transfer through cooling coil or jacket maintain constant temperature through vessel
  • Complete Safety: Safety assemblies provided on vessels protects vessel and operator from the hazards of unexpected high internal pressure
  • Customized Engineering: Available in different specifications with various accessories as per the requirement


  • Sizes from 50ml to 100 liters
  • Pressure range up to 350 bar
  • Temperature range up to 600°C
  • Different material of constructions like SS 316, SS 316L, Hastelloy C, Zirconium, Inconel, Monel, Titanium etc.
  • Conforming to international standards CE, PED, ASME, ATEX etc.
  • Optional touch screen control panel
  • Optional Computer controlled Scada software to continuously monitor, control & record various parameters
Specifications1000 Series
(Lab Scale)
2000 Series
(Lab Scale)
3000 Series
(Kilo Lab Scale)
Autoclave Model NumberNMV 1050NMV 1100NMV 1400NMV 1750NMV 2001NMV 2002NMV 2005NMV 2010NMV 2020NMV 2025NMV 3050NMV 3100
Total Volume50 ml100 ml400 ml750 ml1000 ml2 litres5 litres10 litres20 litres25 litres50 litres100 litres
Operating VolumeMaximum35 ml50 ml200 ml400 ml600 ml1.2 litres3.5 litres7 litres15 litres19 litres38 litres75 litres
Minimum18 ml25 ml80 ml80 ml80 ml150 ml500 ml1 litre2 litres2 litres4.5 litres8.5 litres
L/D Ratio11.411.391.941.961.541.31.361.591.781.63
Maximum Head Openings5455
Vessel MaterialStandardSS 316
OptionalSS 316L, Hastelloy C-276, Hastelloy C-22, Nickel-200, Monel-400, Inconel-600, Inconel-625, Titanium, Zirconium etc.
Design PressureStandard100 bar50 bar
Optional200 bar, 350 bar100 bar
Design TemperatureStandard250°C
Optional350°C, 500°C (600°C for Inconel)350°C
Heating SystemStandardNot Provided
OptionalElectric Ceramic Band Heater with Flameproof Group II A/B Junction Box & Ceramic Wool insulation & SS 304 CladdingSS Jacket
Aluminum Cast heater with Flameproof Group II A/B Junction Box & Insulation
Aluminum Cast heater with Flameproof Group II C Junction Box & Insulation
Insulation & Cladding
SS JacketNA
Internal FittingsStandardSingle Tube in Tube out cooling coil (upto 100 ml), Helical cooling coil (from 400 ml), Thermowell, Dip tube
OptionalDip tube with Filter
Fittings on VesselStandardPressure Gauge, Safety Rupture Disc, Vent Valve, Gas Inlet Valve & Sampling Valve with Dip tube, Temperature sensor (Flp/Exp)
OptionalPressure Relief Valve, Flush Bottom Valve, Ball Valve with charging funnel, Pressure Transmitter (Flp/Exp)
GasketStandardPTFE'O' Ring
OptionalSpiral Wound Metallic Gasket
Non Asbestos (High Temperature)
Electrical SupplyVolts AC1Ø, 220 ± 10% (for Control Panel)3Ø, 415 ± 10% (for Control Panel)
1Ø, 220 ± 10% (for Heater)3Ø, 415 ± 10% (for Heater)
3Ø, 415 ± 10% for Multiple Autoclaves
3Ø, 415 ± 10% Flameproof with Autocooling
Frequency50 Hz (60 Hz Optional)
Control PanelStandardNot Provided
OptionalNon Flame proof SS Control panel
Flameproof Group II-A/B control panel
Flameproof Group II-A/B+H₂ service
ATEX (Zone 1)
MountingStandardTable TopTrolleyFloor Stand
OptionalTrolleyTable TopNA

All Products, Product Specifications and Data are subject to change.

Request For Proposal
Auto-cooling System

The system is useful to control temperature overshoots for exothermic reactions. A cooling liquid is continuously circulated through internal cooling coil. Through our efficient Auto-cooling systems, it is easy to achieve fast and effective cooling of the reaction mass. The circulation of cooling liquid through the internal cooling coil will be switched on/off automatically after sensing the temperature of reactor. The system comprises of circulation pump, hose pipes with quick release coupling, SS 304 water tank. We offer Flameproof II-A/B, II-C & Non-Flameproof options as per requirement.

Back Pressure Regulator

Back pressure regulators are designed to provide steady control of inlet or upstream pressure in the autoclave. If the autoclave pressure increases, the regulator opens to vent out additional flow through the device. As the pressure decreases the regulator closes to restrict flow. This automatic adjustment of flow stabilizes the autoclave pressure.

Ball Valve with Funnel

It is used to charge solid/liquid at Atmospheric pressure.

Chain Pulley

Weight of Head and Vessel increases with increase in size of the autoclave. For large reactors above 10 liters, it is difficult to handle heavy vessels and head. For such large autoclave we offer Chain Pulley Block arrangement as an option. With chain pulley block it becomes easy to lift the head or vessel of big autoclaves. We offer Electric (motorized) or Manual chain pulley blocks as per requirements.


The condenser is used for condensing the vapors from autoclave. The condensed liquid can be collected in receiver pot or refluxed back in to the autoclave. We offer shell & tube condensers with surface area 0.1m², 0.2m², 0.5m², 1m² and 2m². We also supply custom size condensers with different MOCs like SS 316, SS 316L, Hastelloy C-276, Inconel etc.

Digital Pressure Indicator

It is offered in addition to Analogue pressure gauge which is fitted on the vessel as standard accessory. Digital pressure indication unit comprises pressure transmitter fitted on the autoclave & digital pressure indicator mounted on the control panel with high pressure alarm. We offer Digital Pressure Indicator in different Material of Constructions like SS 316, SS 316L, Hastelloy C-276, Inconel etc. with Flameproof / Non-Flameproof Pressure transmitter.

Flameproof Control Panel

Flame-proof control panels are mostly used in places with high concentration of flammable gases, vapors or dust. Electrical equipment which are installed in such conditions must be designed with flame proof enclosure to ensure it does not initiate an explosion due to arcing contacts or high surface temperature of instrument. We offer Complete Flameproof control panels enclosed in Aluminum casting for hazardous area for Zone-1, Group IIA/IIB or IIC as per the requirement.

Flush Bottom Valve:

Liquids & Slurry is discharged from the bottom of Autoclave / Reactor through Flush Bottom Valve. We offer zero hold-up, high pressure FBV with different materials of construction like SS 316, SS 316L, Hastelloy, Zirconium, Inconel, Monel, Titanium etc.

Gas Pressure Regulator:

These are used for charging different gases like Hydrogen, Nitrogen, Air etc. from the gas cylinder to the autoclave. It ensures a constant outlet pressure range from 1 to 100 bars. It regulates the pressure at the outlet of a cylinder to a set value regardless of the pressure inside cylinder. We offer SS 316 Pressure Regulator with Pressure Gauge, NRV, 4 meter long SS braided hose pipe & quick release coupling.

High pressure gas/liquid charging system:

This system is used to inject liquid/gases under pressure up to 100 bar during the reaction. It comprises of high pressure pot, valves, NRV, pressure gauge, high pressure hoses with quick release coupling. We offer 500ml, 1 Litre, 2 Litres, 5 Litres size High pressure gas/liquid charging system with different MOCs like SS 316, SS 316L, Hastelloy C-276, Inconel etc.

Pressure Relief Valve

PRV is a safety device designed to protect a pressurized vessel or system during an overpressure event. It is necessary for additional safety of the autoclave & acts as a supplement to any safety device. The spring loaded Pressure relief valve releases the excess pressure when pressure inside the reactor increase beyond the specified design pressure or maximum allowable working pressure (MAWP), protecting the vessel & the operator. We offer PRV with different MOCs like SS 316, Hastelloy C-276, Inconel etc.

Receiver pot

Receiver pot is installed at the outlet of the condenser to collect the condensate.

Reflux Condenser

Reflux condenser condenses vapors produced in autoclave and drops the condensate back in to the autoclave. It consists of a water jacketed tube of 0.02 m² heat transfer area, connected directly to the vent of the autoclave. Condensed vapors from the autoclave are refluxed directly into the vessel and uncondensed vapors are released through a needle valve at the top of the condenser. We offer Reflux Condenser in various sizes like 0.01m², 0.02m², 0.05m² with different MOCs like SS 316, SS 316L, Hastelloy C-276, Inconel etc.

SCADA Software

Supervisory Control and Data Acquisition (SCADA) is a software used for remote monitoring and control of the reactor / autoclave system. The process data is presented on a computer screen to operators where they monitor and control the process. We offer operator friendly SCADA based software for monitor and control of all parameters. Computer is usually in client’s scope.

Non stirred pressure vessels are used for various applications as below

  • Hydrothermal studies
  • Crystal growth
  • Solid state chemical reactions
  • Geological simulations
  • Corrosion studies of chemicals, acids, liquids, metals
  • Acid digestion
  • Storage of liquid or gas
  • Hydrogen disbanding testing
  • Cell disruption by nitrogen decompression
  • Other reactions and investigations which require the higher pressures and temperatures capabilities